Polyweb Urethane Screens is well known for its abrasion resistance, high open area, capacity and long life .And performance rivaling that of conventional woven wire screens.
Polyweb Urethane Screens features easy installation, reduced operating and maintenance costs, and superior capacity and performance with high open area of 35 to 45 percent.
Polyweb Urethane Screens Polyweb Urethane Screens, Polyweb Urethane Screen, Urethane Screens, Polyurethane fine screen mesh, Urethane Fine Screens, Urethane Screen HUATAO LOVER WIRE MESH CO.,LTD. , https://www.huataowiremesh.com
Jacquard fabric: When the fabric is weaved, the warp and weft structure is used to form the flower pattern, the yarn count is fine, and the raw cotton is extremely demanding. The monochrome jacquard and the multi-color jacquard weaving process are different. The monochromatic jacquard is a jacquard dyed fabric - first weaved by a jacquard weaving machine. The fabric is then dyed and finished, and the finished fabric is solid.
Multi-color jacquard is a yarn-dyed jacquard fabric - firstly dyed the yarn and then weaved by a jacquard weaving machine, and finally finishing, so the yarn-dyed jacquard fabric has more than two colors, the fabric is rich in color, not monotonous, flower The stereotype is stronger and the grade is higher. The width of the fabric is 2 meters 5, and the cotton fabric has a small shrinkage, which can not afford the ball and does not fade.
Plain weave: A fabric woven from a plain weave (the warp and weft are interwoven every other yarn) is called a plain weave. Fabric features: many interweaving points, firm texture, very smooth, smooth surface, the same effect on the front and back, the density of plain weave fabric can not be too high, lighter and lighter, better breathability. The number of branches is about 30, the density is slightly lower, and the fabric is more prone to yarn jumping and the like, and the price is relatively low. However, there are also a few plain fabrics that are also high-density fabrics, and high-grade embroidery fabrics are generally plain fabrics.
Twill fabric: warp and weft yarns are interlaced at least once, and the warp and weft interlacing points are added to change the fabric structure, collectively referred to as twill fabric.
Jacquard fabric: When the fabric is weaved, the warp and weft structure is used to form the flower pattern, the yarn count is fine, and the raw cotton is extremely demanding.
Satin fabric: The warp and weft yarns are interlaced at least once, so the satin weave makes the fabric denser, so the fabric is thicker. Satin tissue products cost more than similar plain and twill weave products. Fabrics woven from satin weave are collectively referred to as satin fabrics. The satin fabric has the front and back sides, the least interlacing point in a complete tissue cycle, the longest float line, the fabric surface consists almost entirely of warp threads in the warp or weft direction, and the satin fabric is soft. The fabric is smooth and delicate and shiny.
The most common satin fabric is striped satin, referred to as satin. Divided into 40 pieces of 2 m 4 wide satin strips and 60 pieces of 2 m 8 wide satin strips. First weaving and dyeing process, the fabric is generally solid. Extends for the horizontal bar. The cotton fabric has a small shrinkage, no ball, and is not easy to fade.
The density of the cloth is often ignored by the buyer, but it often determines the quality of the fabric! In the industry, cloth is basically not counting, they only talk about ** multiplication (eg, 110*90, 128*68, 65*78, 133*72), because the choice of the number is very small, generally 30S and 40S, while the application of 60S is very small. It can be said that the 60S cloth is not suitable for bedding, because she is too thin! There are not a few factories in the 80-dollar factory. You don’t think that 80 pieces of cloth are small, so expensive, I have never seen it, just listened to it, and as far as I know, there are no 80 bedding products in China. come out!
High support and high density:
Fibers that reach a certain fineness count have a warp and weft number per square inch, such as 110*90, that is, 110 warp yarns and 90 weft yarns in 1 inch.
The high-density and high-density cotton fabric has a latitude and longitude of 173*124 and 40*140. Yarn count 60*60, 60*40.
Combing: The process of removing the impurities and the short and short fibers of the cotton fiber before weaving the cotton fiber, so that the fabric has a glossy feel and a fine craft.
Yarn weaving: Cotton fiber is dyed and dyed before weaving. The pattern and texture are woven by fibers of different colors, and the process is high.
Home textile common sense: how to choose fabric materials
Home textile knowledge: How to choose the most common satin fabric is the striped satin, referred to as satin. Divided into 40 pieces of 2 m 4 wide satin strips and 60 pieces of 2 m 8 wide satin strips. First weaving and dyeing process, the fabric is generally solid. Extends for the horizontal bar. The cotton fabric has a small shrinkage, no ball, and is not easy to fade.
Prev Article
Purchase and maintenance of pure blankets